Golden Care Teak Protector (1 Liter Bottle)

This environmentally friendly, water-based formula is designed to maintain the original color of teak. The UV
blockers in the formula significantly slows down the greying process caused by exposure to direct sunlight
and other extremities of the outdoors.

Teak Protector Finish used OUTDOORS is expected to last 2-6 months depending on the number of applications, location and personal preference.

• Helps prevent mold and mildew.
• Non-flammable, no VOCs (Volatile Organic Compound), solvent-free, and safe around the home.
• Made for optimal penetration into hardwoods with dense, low-porosity surfaces such as teak.
• Quick and easy to apply.
• To further protect teak furniture from food spills and stains, we highly suggest the application of
  Teak Shield (30103) after the application of Teak Protector.

Instructions For Use:

* Before using this product, eye protection and rubber gloves
   should be worn. Cover the ground under your working area before cleaning.
* New Teak: First clean with our Teak & Hardwood Cleaner to remove the
   natural oils (or weather for 2 weeks outside before treatment).
* Grey wood or wood treated with teak-oil must first be cleaned with our Teak & Hardwood Cleaner.
* If cleaned wood feels rough, sand lightly before treating with Protector.
   Make sure the wood is 100% dry and free of dust.
* Shake and stir the Protector at least one minute before use.
   Insufficient shaking can lead to uneven decolourisation.
* We suggest trying the Protector on a small area first to judge if the color meets your expectations.
* Apply a very thin layer of the Protector evenly over the furniture with a dust free cloth.
   Apply a second very thin coat after 30 minutes drying time.
* It is recommended that you treat your furniture with this Protector at least once a year.
   

NOTE: Allow new teak to weather for a week or two before applying Teak Protector. Clean soiled or stained
teak with Teak Cleaner, or with mild soap and water and leave furniture to completely dry before applying
Teak Protector. Apply second coat only after the first coat has been left to dry completely for about an hour.

Suggested quantity requirement
A 1(one) liter bottle will protect approximately 1 (one) dining set for 8 (eight) i.e. 1 table + 8 dining chairs.

Click here for material safety information.